Advanced Training
MACHINE, HOLDER OR TOOL NOT IN DATABASE
Using Generic Databases to quickly add machine model, toolholder or cutting tools.
Click Here
Using Generic Databases to quickly add machine model, toolholder or cutting tools.
Click Here
SENDING A TAP-TEST FILE TO SUPPORT
When you arrive for a tap-test, connect to a customer's WIFI or activate your hotspot before you start. If a problem should arise you can quickly send us the TXF file for support. Be sure to text or email us that a file is on its way and describe the issue.
Click Here
For the interactive lesson: Click Here
PUSHING THE ENVELOPE
When you want to push beyond the predicted width and depth of cut limits of the Dashboard
Click Here
For the interactive lesson: Click Here
When you want to push beyond the predicted width and depth of cut limits of the Dashboard
Click Here
For the interactive lesson: Click Here
TAP-TESTING NON-STANDARD MILLING TOOLS
High Feed Mills Click Here
Dovetail Cutters Click Here
Barrel Cutters Click Here
Keyseat Cutter Click Here
Thread Mills Click Here
Slotting Cutters Click Here
High Feed Mills Click Here
Dovetail Cutters Click Here
Barrel Cutters Click Here
Keyseat Cutter Click Here
Thread Mills Click Here
Slotting Cutters Click Here
SETTING OPENING VALUES ON DASHBOARD
You can set at what values (speed, feed, width and depth of cut) the Dashboards opens by following the instructions on this video
Click Here
You can set at what values (speed, feed, width and depth of cut) the Dashboards opens by following the instructions on this video
Click Here
LIMITING SFM ON DASHBOARD
You are machining a material with lower surface speed (SFM) limits and you don't want the customer to try too fast a speed because it shows green on the Dashboard.
Click Here
You are machining a material with lower surface speed (SFM) limits and you don't want the customer to try too fast a speed because it shows green on the Dashboard.
Click Here
CALIBRATING MATERIAL PROPERTIES ON THE DASHBOARD
When you tap-test an existing tool and the current parameters show red on the Dashboard.
Click Here
For the Interactive Lesson: Click Here
When you tap-test an existing tool and the current parameters show red on the Dashboard.
Click Here
For the Interactive Lesson: Click Here
ADVANCED DASHBOARD FUNCTIONS
See the impact on Dashboards using the same tools and toolholders on different machines.
Click Here
See the impact on Dashboards using the same tools and toolholders on different machines.
Click Here
USING DASHBOARDS TO TUNE ENDMILLS
Changing the stick-out or the flute count to optimize performance of milling tools.
Click Here
Changing the stick-out or the flute count to optimize performance of milling tools.
Click Here
ADDING A MACHINE'S TORQUE AND POWER CURVE
Fine tune machine tool settings by embedding torque and power curve.
Click Here
Fine tune machine tool settings by embedding torque and power curve.
Click Here